01925 720 001
  • T&R PT30-10 KVDC High Voltage DC Test Set

T&R PT30-10 KVDC High Voltage DC Test Set

T&R Test Equipment

£190.00 per week


Call 01925 720 001

Contact Us

The PT30-10 high voltage dc test sets are designed to perform tests on installed cable and jointing systems. The units have a variable output voltage with a maximum ±30kVdc. The unit has a maximum charging capability of 10mA. A zero-volt interlock is fitted that prevents the output being switched on unless the output control is at zero.

The unit includes an automatic load discharge system that discharges the cable under test when the output is switched off or a breakdown occurs. The internal dumping system can discharge a maximum of 2.5kJ on each output, corresponding to 4uF at 30kV. In the event of a test object failure, the overload circuit will automatically switch off the output voltage and earth the output via the internal discharge circuit. A manual discharge probe is also supplied as standard with both units, allowing higher load capacitances to be safely discharged.

Features

  • ±18kVdc output voltage (PT18-10) ±30kVdc output voltage (PT30-10)
  • 10mA output capability
  • Both voltage and current metered on HV outputs
  • Automatic earth system for dumping capacitive loads
  • HV output plug & socket system
  • Key operated supply switch to prevent unauthorised operation
  • Zero-volt interlock
  • Visual indication of test piece failure
Datasheet PDF