01925 720 001
  • T&R 200ADM Current Injection System

T&R 200ADM Current Injection System

T&R Test Equipment

£170.00 per week


Call 01925 720 001

Contact Us

The 200ADM is the most recent addition to the range, and provides commissioning and maintenance engineers with a flexible system for testing protective systems. It has an easy to understand panel layout and a simple user interface. The status of every function can be seen at a glance, and there are no complex menus to navigate.

The unit has a range of outputs allowing injection of currents as low as 1mA and as high as 200A. Voltages- up to 240V are available on the main outputs, allowing high impedance current relays and voltage relays to be tested. Four true RMS metering ranges are provided, allowing the full scale of the meter and trip level to be set independently of the selected output-. Industry standard safety connectors are used on all inputs and outputs for convenience, reliability and safety.

The 200ADM is comprehensively protected by overcurrent, duty cycle and thermal trips, and keeps the user fully informed of any trip condition.

An auxiliary metering input is provided and can measure AC and DC voltage, current, frequency, and the phase between the main current output and an external voltage or current. A stabilised DC supply is provided to power the relay under test, along with an independently variable AC output.

The timing system is very flexible without compro-mising ease of use, allowing trip times, reset times and reclose times to be quickly measured to a high degree of accuracy.

Datasheet PDF